The bearing of the washing machine is broken and cannot be used but repaired. Easily broken reasons:

1. The bearing itself is a wearing part. The working conditions and environment of the bearing used in the washing machine are relatively poor. The main reason is the long-term operation in a humid environment.

1. The bearings on many equipment have refueling holes for regular refueling, and it is difficult to refuel the bearings of washing machines.

2. The bearings on general equipment are not at risk of being flooded, but the bearings of washing machines are easily damaged by water and rust due to the aging and wear of the rubber sealing sleeve.

2. Regular maintenance, replacement of the rubber sealing sleeve, and use of a disposable syringe to add lubricating oil to the bearing can still prolong the working life of the bearing of the washing machine.

Third, remember, be sure to add oil, do not add cooking oil to save trouble.

A fully automatic washing machine is to pre-set n programs for the whole process of laundry (soak-washing-rinsing-dehydration). When washing, select one of the programs, turn on the faucet and start the washing machine, and the whole process of laundry will be completed automatically. The buzzer sounds when the laundry is finished.

The automatic washing machine controls the water intake, drainage and the on-off of the motor through the cooperation of the water level switch and the electromagnetic water inlet valve: so as to realize automatic control. The electromagnetic water inlet valve plays the role of opening and closing the water source. When the electromagnetic coil is powered off, the moving iron core is tightly pressed against the rubber diaphragm under the action of gravity and spring force, and the center hole of the diaphragm is blocked, so that the valve is closed and the water cannot flow.

When the electromagnetic coil is energized, the moving iron core moves up under the action of magnetic force, leaves the diaphragm, and opens the center hole of the diaphragm, so the water above the diaphragm flows into the washing tub through the center hole. Because the flow capacity of the central hole is greater than the flow capacity of the small holes on both sides of the diaphragm, the pressure above the diaphragm decreases rapidly, the diaphragm will move up under the action of the pressure difference, the door will be closed, and the water flow will be conducted.

6206-2RS
Deep groove ball bearings are simple in structure and easy to use. Mainly used to bear radial load, but when the radial clearance of the bearing is increased, it has the performance of a certain angular contact bearing and can bear the combined radial and axial load.